Model No.: MSO7102T
Design and Debug
Circuit function test
Identified signals logic information
Mixed signal circuit test
Education & Training
Support both DSO and LA
100MHz Bandwidth, up to 1G/s real time sample rate
16 optional logic input channels
Max 6000 points record length for each channel
Dual channels + External trigger + Logic Analyzer
7.8 inch color LCD display for large view
Support USB data transmission, display by real-time
Advanced trigger functions: Edge trigger, Bus trigger, Pattern trigger,Sequential queue trigger,
Distributed queue trigger and Data width trigger.
|Sample Rate(Real time)|| 500 MS/s(dual channels)
1GS/s (single channel)500 MS/s(dual channels)
1GS/s (single channel) 500MS/s(dual channels)
1GS/s (single channel)
|Display||7.8 inch colored LCD, 256 colors, STN/TFT screen, 640×480 pixels|
|Channel||Dual channels + external trigger + Logic Analyzer|
|Horizontal scale (s/div)||5ns/div-5s/div(step by 1-2.5-5)|
|Interval(△T)accuracy(full bandwidth)||Single：±(1 interval time+100ppm×reading+0.6ns)|
|Average>16：±(1 interval time +100ppm×reading+0.4ns)|
|Vertical Sensitivity||5mV/div～5V/div (at input)|
|DC Gain Accuracy||±3%|
|Vertical resolution (A/D)||8bits resolution (2CH simultaneously)|
|Max. Input Voltage||300V(DC+ AC Peak) (1MΩ input impedance,ProbeAttenuation rate 10:1)|
|Input impedance||1MΩ±2% in parallel with 20pF±5pF|
|Trigger Mode||Edge、Video、 Alternate、Mains supply|
|Sampling Mode||Normal, Peak detection, Average|
|Record length||Max. 6000 points on each channel|
|Waveform storage||4 waveforms|
|Automatic Measurement||PK-PK, Average, RMS, Frequency, Cycle.|
|Waveform math||＋,－, Inverted|
Logic Analyzer specification
|Sample rate (real time)||15S/s-400MS/s|
|Trigger mode||Edge trigger, Bus trigger, State trigger, Dataalignment trigger, Data width trigger|
|Trigger position setting||Pre-trigger, mid-trigger, Post-trigger|
|Threshold Voltage||0～10V(4 settings)|
|Input Signal Range||±15V|
|Data System||Binary system, Decimal system, Hex|
|Digital filter||0,1,2 optional|
|Setting storage||Support 10 settings|
The current electronic products become more complicated as the number of digital circuits and universa l serial
bus increase. It results in the edge become vague to choose a suitable testing instrument.Thetesting signa l often
mixed by analog and digital signal,so the engineer would like to get an instrumentcould test both of analog and digital
signals. To meet their demand, our MSO series was launched. ----MSO series Mixed LA-oscilloscope
MSO series combined digital storage oscilloscope & logic analyzer functions, the performance is remarkable,
the functions is powerful. It enables user to analysis the analog signals and digital signal on same instrument to save your costs.
Digital Storage oszilloskop
Up to 60M bandwidth, up to 500MS/s Sample rate (Real-time)
Max. Storage 6000 points each channel
Adjustable trigger sensitivity
Advanced trigger functions: Edge trigger, Video trigger and Alternate trigger,Mains supply trigger
Logic Analyzer :
20S/s～500MS/s Sample rate (step by 1-2-5)
16 optional logic input channels
Max. 4M record length for each channel
Threshold Level setting (0～4V)
4 BUS setting
Random trigger position setting
Digital filter function
Flexible data searching methods
Various advanced trigger functions
Support USB, RS232 data transmission and U-storage.
2 in 1 T&M instrument
As an effective tool of analog circuit analysis, Digital storage oscilloscope is familiar to most of engineers.
OWON Mixed –Signal Oscilloscope is different from other test instruments. The cus- tomers can obtain both
high capability oscilloscope and Logical analyzer in one portable signals instrument. By integrating the
analog and we can show, trigger and analyze two types of in one instrument.
Powerful test and measuring function
OWON MSO series have perfect test and powerful analyze function, which includes Multi-trigger function,
Bus setting,Threshold Level adjustment setting, Data searching, Digital filter,Save and recall trigger setting,
Auto bus measuring, Cursor measuring, Pre-trigger setting, Code Setting, USB storage and so on.The application cover
basic digital circuit such as TTL and CMOS,through these functions, it can correct the digital products fast,and save the
time for R&D development.
Capture and analyze the burr signals
The time sequence waveform generated in the digital circuit always interfered by unexpected burrs.
In this case, the logical analyzer can do nothing about the shape and measurement of the burr but only analyze
high and low level. Therefore, the engineer needs an oscilloscope as an assistance to test the burr and take
measurement to solve the problem accordingly
Complementary function improve the measurement veracity
The waveform of Logical analyzer is got from comparison between test signal and Threshold Level.
Incorrect Threshold level will lead to confusion for the whole testing time sequence.
OWON MSO5022 can help you understand time sequence information exactly and set Threshold Level correctly.
Intuitionistic operation panel
The operation panel of MSO5022 still use OWON consistent appearance which is familiar to many users,
by this way, the users can save much time to know and operate our product. Widespread education tool.
With our competitive price,MSO5022 can be widely used in many schools as a useful instrument for the education
of digital circuit, just like our widespread oscilloscopes.
Mainly occasions for Logical analyzer
1.To test multi-signal at the same time
2.To test digital signal same as hardware test
3.To trigger the high and low level models on several wires at the same time and examine the results.
4.To trace the execution of software in the system timely.
1.Electronic circuit, communication, optoelectronics, etc.
2.R&D design and debug in the digital circuit.
3.Education and training in the digital circuit and signal.
Digital real-time sampling technology
With the advanced digital sampling technology enable to debug and detect signals for two chan-nels simultaneously
and efficiently. Capture unrepeatable signal with high frequency such as bu- rrs or exceptional edge completely
therefore engineers are able to control any signal changes.
High precise sampling technology
MSO series adopts high precise sampling technology,collecting and testing time sequence graphics
which input from 16 channels simultaneously to make every detail changes of graphics are under engineer’s control.
Perfect trigger functions :
The strong trigger functions enable to detect the time sequence reliability and accuracy by any methods.
As a tool of logic analysis, how trigger function perform will decide the practicability for this instrument.
The trigger functions include Edge trigger, Bus trigger,Pattern trigger, Seq- uential queue trigger, Distributed
queue trigger and Data width trigger. Flexible setting for trigger position The unexpected event or bug in the
digital circuit often happen at certain moment, the analysis should base on the event changes before and after
that moment. So it is a very important part for an engineer to observe the time sequence changes before and after
that trigger point. The trigger point for MSO5022 is adjustable which support the engineer to analyze the specific data
queue timely and effectively. Bus settings function—analyze the time sequence quickly and effectively To analyze logical
time sequence, we need signals collected from many channels, the result is there are too many channels and data are
being shown on the screen, which is very hard to make analysis. For example, for those often used buses such as
address bus or data bus are composed of multidigit data,if we can choose part of them as one independent bus,
the number of channels are reduced and is convenient for us to observe the change of this bus. Actually, it has been done by MSO series.
As a standard for high and low level of digital signal, whether the threshold set is reasonable can
determine the veracity of the whole measurement. Our MSO series supply threshold set which
ranges as 0～4V and many sets of independent threshold set to meet the strict testing condition.
Search data quickly
Trigger position or the analysis for a certain pattern are the keys in debugging logical circuit, and how to lock
the trigger position quickly or search the expected bus pattern are the foundation of improving debugging efficiency.
Our MSO series supplies the search modes such as trigger posit- ion, bus pattern, state set, etc to locate the time
sequence exactly. Digital filter The random of noise or glitch in the digital circuit can effect the analysis of the
wholewaveform or change the time sequence result. Our digital filter function is able to inhibit the burrs effecti-vely when
the signals change on the bus, and make the waveform clear to be analyzed. Storage setting For a complicated
circuit,it is essential to set different triggers to analyze time sequence,and the same trigger set usually be used
repeatedly. If we reset the trigger condition, much time and energy will cost. That’s not problem for our MSO series,
because we could save the trigger set, the repeatable trigger is available only to recall the save one.
Click the picture to view large picture
1) 2 probes;
2) Power cord;
3) Logic analyzer module;
5) test leads for 16 channels LA
6) Manual and software CD
Click here to download the Software and English maunal:
Erklären Sie uns Ihre Beurteilung über das Produkt und teilen Sie Ihre Erfahrung. Stellen Sie bitte sicher, dass Sie Ihre Beurteilung ausschließlich über dieses Produkt erteilt. Alle Beurteilungen werden innerhalb 2 Tagen überprüft, alle unkorrekten Beurteilungen werden nicht aufgestellt.
Kundendienstfragen : Bitte treten Sie mit unserer Kundendienstabteilung in Verbindung. Unser Kundenvertreter wird Sie so schnell wie möglich kontaktieren.
Bitte loggen Sie ein, wenn Sie Ihre Beurteilungen editieren und verwalten möchten.